Products
Insulated Metal Panels (IMP), Doors and Trim. One Source.
Double-steel-sheet Insulated Metal Panels (IMP) with a PUR or PIR foam core for walls and roofs in industrial, commercial and residential buildings, hangars and warehouses.
A flagship wall panel with concealed joints for a flush finish.
Through-fastened wall panel in ribbed, boxed or smooth profiles.
Roof panel for general construction and cold-storage roofing.
Corrugated roof panel with internal aluminum support for long spans.
Hygienic-finish Insulated Metal Panels (IMP) for cold rooms, walk-in coolers and freezers, refrigerated and frozen storage, clean rooms and food processing.
A sanitary face for cold rooms and processing areas that need moisture resistance.
Wall panel with a vinyl surface suited to wash-down environments.
The companion to the Box Vinyl panel, for consistent cold-storage walls.
Mineral wool (Rockwool) Insulated Metal Panels (IMP) for projects where fire rating and acoustic performance matter.
Self-supporting wall panel with visible fastening.
The same wall panel with concealed fastening for a smooth surface.
Perforated steel liner for sound absorption.
Low-slope roof panel with an external ribbed steel sheet.
Self-supporting roof panel with a perforated liner for sound dampening.
Cooler, cold room and clean-room Doors matched to the thermal performance of the surrounding Insulated Metal Panels (IMP).
Flush insulated leaf with an aluminum edge frame, heavy hinges and a key latch.
See It in 3DTwo hinged leaves meeting at a gasketed center, for wide openings and pallet traffic.
See It in 3DHeavy-duty sliding door for temperature control and secure access.
See It in 3DFlush insulated door in an aluminum frame with a lever handle and key cylinder.
See It in 3DFlush door with a round vision window, aluminum frame, lever handle and door closer.
See It in 3DTwo flush leaves with vision windows for clean-room and process-room openings.
See It in 3DTrim, fasteners and sealants made for Insulated Metal Panel (IMP) systems.
Light-gauge aluminum angle trim for finishing panel edges and corners.
Heavier aluminum angle trim for edges, corners and transitions.
Heavy aluminum T section for supported seams and transitions.
Outside corner profile made to fit a 4" (100 mm) panel.
Radiused inside-corner trim, supplied as a set with its aluminum base.
Formed steel flashing for exterior corners, in the same steel as the panel.
Slotted pre-galvanized strut channel for supports, hangers and mounting.
A PVC wall system for hygienic, wash-down interiors.
Hygienic PVC wall lining panel for wash-down and moisture-prone rooms.
PVC track that receives the bottom edge of the PVC wall panels.
H-section PVC track that joins two PVC wall panels edge to edge.
PVC angle that finishes corners between PVC wall panels.
HARVEST PANELS